Onduline Building Products




(c) Apycom	ONDUTILE Accessories
	The Ondutile System is complemented by a range of accessories including:

	Ondutile Batten Cloaking Piece The Ondutile Batten Cloaking Piece/Flashing is manufactured from black polypropylene. It is used in conjunction with the Eaves Ventilator Strips and protects the eaves batten from possible water ingress whilst also providing an aesthetically pleasing finish to the eaves detail.			Click to Enlarge

		Specifications
		Material	1.4mm thick 'L' shape section, black polypropylene
		Length	1.22mm (1.12mm cover width)
		Width	45mm x 45mm for 19mm battens
			55mm x 55mm for 25mm battens
		Weight	0.1kg / piece
		Packing	Available in singles

	Ondutile Eaves Tray The Ondutile Eaves Tray is manufactured from black PVC. It forms a drip edge into the gutter and sealing tray below the Onduline. This prevents water being blown back beneath the Onduline sheets into the roof space, thus forming a watertight detail at the eaves. The Ondutile Eaves Tray is secured by nailing with galvanised round headed nails into a plywood supporting deck, allowing a 200mm overlap between sections.			Click to Enlarge

		Specifications
		Material	1mm gauge black PVC
		Length	1275mm (deduct 150mm lateral overlap for effective length)
		Weight	0.4kg per tray
		Packing	Available in singles



	Ondutile Eaves Ventilator Strip The Ondutile Eaves Ventilator Strip is manufactured from black polypropylene. The Ventilator Strips are used to allow ventilation into the roof space whilst preventing the infiltration of birds into the eaves. They are secured by nailing with galvanised, round headed nails through the slots on the base-tab into the eaves purlin.			Click to Enlarge

		Specifications
		Material	Black polypropylene with a special additive for extra
			UV resistance
		Length	1m
		Weight	5.25kg per box
		Dimensions	1.01m x 0.16 x 0.12m per box
		Packing	50 strips per box


© 2003 Onduline Building Products Limited